Mechanical properties of PLA and ABS parts produced with fused filament fabrication method

Basit Öğe Kaydı
dc.contributor.authorTopcu, Ismail
dc.date.accessioned2026-01-24T12:26:37Z
dc.date.available2026-01-24T12:26:37Z
dc.date.issued2021
dc.departmentAlanya Alaaddin Keykubat Üniversitesi
dc.description.abstractThe use of special and specific parts that are easily produced by the additive manufacturing method is of great importance in the following process. The ease of the materials and the low cost of the open source printers increase the use of the Fused Filament Fabrication (FFF) method. Due to the differences in FFF technology, investigation of the effects of the parameters on the mechanical properties of materials is necessary to determine the usability of the functional parts. Tensile strength was determined as 46.8 MPa for polylactic acid (PLA) and 34 MPa for acrylonitrile butadiene styrene (ABS). Polylactic acid specimens have a better wear resistance than acrylonitrile butadiene styrene (12.9 g) samples with a weight loss of 5.1 g at 5000 m. According to the mechanical data Polylactic acid was found to be good properties than acrylonitrile butadiene styrene . In order to select most durable plastic for the unique application, the results of this study, which are given as graphs, diagrams and pictures, can help to the design engineers.
dc.description.sponsorshipScientific Research Project Program of Marmara University [FEN-K-070317-0107]
dc.description.sponsorshipThis work was supported by the Scientific Research Project Program of Marmara University (FEN-K-070317-0107).
dc.identifier.doi10.36410/jcpr.2021.22.2.143
dc.identifier.endpage148
dc.identifier.issn1229-9162
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85108429598
dc.identifier.scopusqualityQ4
dc.identifier.startpage143
dc.identifier.urihttps://doi.org/10.36410/jcpr.2021.22.2.143
dc.identifier.urihttps://hdl.handle.net/20.500.12868/4813
dc.identifier.volume22
dc.identifier.wosWOS:000648546200002
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherKorean Assoc Crystal Growth, Inc
dc.relation.ispartofJournal of Ceramic Processing Research
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20260121
dc.subjectAdditive manufacturing (AM)
dc.subjectFused filament fabrication (FFF)
dc.subjectPolylactic acid (PLA)
dc.subjectAcrylonitrile butadiene styrene (ABS)
dc.subjectWear properties
dc.titleMechanical properties of PLA and ABS parts produced with fused filament fabrication method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu