Mechanical properties of PLA and ABS parts produced with fused filament fabrication method
[ X ]
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Korean Assoc Crystal Growth, Inc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The use of special and specific parts that are easily produced by the additive manufacturing method is of great importance in the following process. The ease of the materials and the low cost of the open source printers increase the use of the Fused Filament Fabrication (FFF) method. Due to the differences in FFF technology, investigation of the effects of the parameters on the mechanical properties of materials is necessary to determine the usability of the functional parts. Tensile strength was determined as 46.8 MPa for polylactic acid (PLA) and 34 MPa for acrylonitrile butadiene styrene (ABS). Polylactic acid specimens have a better wear resistance than acrylonitrile butadiene styrene (12.9 g) samples with a weight loss of 5.1 g at 5000 m. According to the mechanical data Polylactic acid was found to be good properties than acrylonitrile butadiene styrene . In order to select most durable plastic for the unique application, the results of this study, which are given as graphs, diagrams and pictures, can help to the design engineers.
Açıklama
Anahtar Kelimeler
Additive manufacturing (AM), Fused filament fabrication (FFF), Polylactic acid (PLA), Acrylonitrile butadiene styrene (ABS), Wear properties
Kaynak
Journal of Ceramic Processing Research
WoS Q Değeri
Q4
Scopus Q Değeri
Q4
Cilt
22
Sayı
2
