Yazar "Topçu, İsmail" için listeleme
-
Determination of the mechanical properties of al/mwcnt composites obtained with the reinforcement of cu-coated multiwall carbon nanotubes (mwcnts)
Topçu, İsmail (Inst Za Kovinske Materiale I In Tehnologie, 2020)In this study, Al/MWCNT composites were produced by milling copper-coated MWCNTs in small amounts (2.5-7.5%) with aluminum powders using the mechanical alloying method. Then, sintering was applied to the composite material. ... -
Effect of multiwalled carbon nanotubes on elevated temperature tensile and wear behavior of Al2024 matrix composites fabricated by stir casting and hot extrusion
Turan, Muhammet Emre; Rashad, Muhammad; Zengin, Huseyin; Topçu, İsmail; Sun, Yavuz; Asif, Muhammad (Springer, 2020)In this study, aluminum alloy matrix composites reinforced with MWCNT particles by 0.5 wt.% were fabricated by a new developed technique, consisting of semi-powder metallurgy and stir casting processes. Then, hot extrusion ... -
Experimental investigation on mechanical properties of Multi Wall Carbon Nanotubes (MWCNT) reinforced aluminium metal matrix composites
Topçu, İsmail; Ceylan, Muhammet; Yılmaz, Elif Burcu (Korean Assoc Crystal Growth, Inc, 2020)The aim of this research is to obtain better micrographs and to perform the mechanical characterization of Multi Wall Carbon Nanotubes (MWCNT) consolidated aluminum matrix composite (AMC). This research is focused on the ... -
Investigation of creep behavior of CNT reinforced Ti6Al4V under dynamic loads
Topçu, İsmail; Çetiner, Burcu Nilgün; Güllüoğlu, Arif Nihat; Gülsoy, Özkan (Chem Soc Pakistan, 2020)This study investigates the effects of addition of Carbon nanotube (CNT) at different volume ratios (0.5- 5%) into Ti6Al4V matrix by mechanical alloying in terms of the density, microstructure, hardness and creep under ... -
Investigation of wear behavior of particle reinforced AL/B4C composites under different sintering conditions
Topçu, İsmail (Univ North, 2020)In this study, the effects of different sintering conditions of boron carbide reinforced to aluminum matrix powder on microstructure, density and wear resistance by a mechanical alloying method were researched. Powders ... -
Karbon nanotüp takviyeli Ti-6Al-4V/KNT kompozitlerin aşınma davranışlarının incelenmesi
Bu çalışma da mekanik alaşımlama yöntemiyle Titanyum (Ti-6Al-4V) tozuna takviye edilen Karbon Nanotüplerin farklı üretim sinterleme koşullarının mikroyapı, yoğunluk ve aşınma direnci üzerine etkileri incelenmiştir. Mekanik ... -
TIG ve MIG kaynağı ile işlem gören 304 ve 1040 çeliklerin ITAB bölgesindeki mekanik özelliklerin incelenmesi
Topçu, İsmail (2019)Bu çalışmada düşük ve orta karbonlu çelik türlerinin TIG ve MIG kaynağı ile kaynak bölgesinin mekanik ve mikroyapı özelliklerine kaynak parametrelerinin etkileri incelenmiştir. Kaynak uygulaması farklı akım ve tel besleme ... -
Wear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubes
Ceylan, Muhammet; Topçu, İsmail (Korean Assoc Crystal Growth, Inc, 2020)The purpose of this study was to investigate the sintering behavior, microstructural evolution, and the effect on wear resistance of carbon nanotubes (CNT) with the addition of a mechanical alloy (Ti6Al4V) and sintered ...
